12" Milled Gray Horizon with tapered-back sawn ends: project wall

Milled limestone vs natural ledge

Two ways to stack the same Kansas limestone. Natural ledge keeps 14" tall courses as they came from the quarry. Milled stone is planed top and bottom to a uniform 12¾". Sawn tapered-back ends are the plus version of a tier (Ranch+, Estate+, Signature+, or Heirloom+), for tighter joints and faster installs. Returns are finished with a natural end.

Sunset Stone Company · Updated 2026-11-10

Before you build: important notes. This article is general guidance for planning a natural stone retaining wall, not engineering, legal or site-specific advice. Check local codes and permits, call 811 before you dig, and have taller or loaded walls reviewed by a licensed engineer or qualified contractor. Sunset Stone supplies the stone and does not design or install walls. Read the full notes.

Text product type and zipcode for pricing! (785) 340-0301

Or call (785) 340-0301 · email info@sunsetstoneco.com. We deliver the stone. We do not design or install the wall.

The difference, in plain terms

Both products are Flint Hills limestone from our quarry. The choice is how the horizontal beds are finished, not a different rock, and not a slight on anyone else's material.

Natural ledge leaves the top and bottom as quarried. Each course is about 14 inches tall. 14" Premium (Estate) with natural tops and bottoms, in Natural Tan and Gray Horizon, has about 1 inch of natural variance, so you keep the natural look and still build clean courses. Joints have some natural variation, and the wall reads as stone that came out of the ground. 14" Premium (Estate) is hand-selected for consistent 18–24" beds and clean faces, in Natural Tan, Gray Horizon, or 50/50. Sundown Ledge (Ranch) is the same 14" tall course with more variation (10–30" beds) and a rougher face, the natural, quarried look. Ranch+ and Estate+ add sawn tapered-back ends.

Milled limestone is that 14" rock with the top and bottom planed flat and parallel to 12¾" actual. Double-sided milled (Heirloom) is held to a ¼" thickness tolerance, so courses stack level with no shimming and the wall goes up faster, with tight joints. Single-sided milled (Signature) is held to a ½" tolerance, so you still get a flat bed to set against, and it costs less than double-sided. Use it when only one bed needs to be true. The visible face is never milled. Colors match the natural ledge: Natural Tan, Gray Horizon, and 50/50. Milled stone is processed to order and typically ships in 1–2 weeks from our processing yards; natural 14" usually loads from the quarry within a few days.

Natural ledge12" Milled
Course height14" tall (±1"), natural top and bottom12¾" actual, planed top and bottom from 14" rock
Thickness toleranceAbout 1" +/- natural variance on 14" Premium with natural tops and bottoms¼" on double-sided milled; ½" on single-sided milled
Bed depth18–24" on Premium; 10–30" on Sundown Ledge18–24", varying
FaceNatural split faceNatural split face (the face is never milled)
Horizontal jointsNatural, with some variation course to courseTight and flat, no shimming
Lead timeUsually loads within a few daysProcessed to order, typically 1–2 weeks
Loads atOur Flint Hills quarryOur processing yards

There is no 14" milled stone: milling planes 14" rock down to 12¾". For Gray Horizon specifically, see 14" Gray Horizon vs 12" Milled.

Side by side

Sawn tapered-back ends

Sawn ends are not the same thing as milling. Milling flattens the top and bottom. Sawn tapered-back ends square the ends so vertical joints close on long, straight runs: entries, patios, and pool walls. We saw the joints that meet another stone; returns and exposed ends stay natural so a sawn cut does not show. 12" Milled Ledge Stone with Sawn Ends is that upgrade.

Which one should you text us about?

If the wall is holding grade and you want a quarried look, start with natural 14" tall courses: Premium if the face will be seen every day, Sundown Ledge if the wall is doing a job and budget matters more. If the joint lines will show and your installer wants every course the same height, start with milled. If the vertical joints matter too, add sawn tapered-back ends.

You can mix natural, milled, and sawn-end stone on the same wall. Tell us the layout and we will split the tonnage. For height, photos, and what to send us, see how to plan a limestone retaining wall.

Text product type and zipcode for pricing! (785) 340-0301

Or call (785) 340-0301 · email info@sunsetstoneco.com. We deliver the stone. We do not design or install the wall.

Quick answers

What is milled limestone?

Milled limestone is wall stone with the top and bottom planed flat and parallel. Ours starts as 14" rock and finishes at 12¾" actual course height. Double-sided milled is held to a ¼" thickness tolerance, so courses stack level with no shimming and the wall goes up faster, with tight joints. Single-sided milled is held to a ½" tolerance, so you still get a flat bed to set against, and it costs less than double-sided. The face is never milled. It stays a natural split. See 12" Milled Ledge Stone.

What is milled stone?

Milled stone is another name for milled limestone: wall stone with the top and bottom planed flat and parallel to a 12¾" course, while the face stays a natural split. See 12" milled limestone.

What is natural ledge?

Natural ledge is the same stone with the top and bottom left as they came from the quarry. Our 14" Premium and 14" Sundown Ledge are natural-ledge products. 14" Premium with natural tops and bottoms, in Natural Tan and Gray Horizon, has about 1 inch of natural variance, so you keep the natural look and still build clean courses.

Why is 12" Milled actually 12¾"?

It starts as 14" quarry rock. Milling planes the top and bottom to a uniform 12¾" height. There is no 14" milled stone.

What are sawn ends?

Sawn tapered-back ends are a separate upgrade on milled stone. The ends are sawn so vertical joints close up on long, straight runs. Wall returns, exposed ends, and stair ends are finished with a natural end so nothing sawn shows. See 12" Milled Ledge Stone with Sawn Ends.

Do you install the wall?

No. We deliver the stone. Your crew or installer builds the wall. Many installers tell us a milled wall goes up faster than a natural-course wall, which can offset milling time in labor. That is their call, not a promise from us.

How do I get a price?

Text product type and zipcode for pricing! (785) 340-0301 Email info@sunsetstoneco.com if you would rather write.

Text product type and zipcode for pricing! (785) 340-0301

Or call (785) 340-0301 · email info@sunsetstoneco.com. We deliver the stone. We do not design or install the wall.

Before you build: important notes

The information in this article is general guidance for planning a natural stone retaining wall. It is not engineering, legal or site-specific advice. Building codes, permit rules and setback requirements vary by state, county and city, so check with your local building department or municipal authority before you start. Get any required permits.

Call 811 or visit Call811.com at least a few business days before any digging so underground utilities can be marked. This free service is required by law in most states. In Kansas, you can also reach Kansas811.

Soil type, compaction, drainage and regional conditions such as clay, frost depth and groundwater all affect how a wall performs. A wall that works well on one site may not work on another. Walls over 4 feet tall (measured from the bottom of the footing), walls holding back a slope, driveway or structure, and walls near property lines or water should be reviewed by a licensed engineer or qualified contractor.

Sunset Stone supplies the stone and does not design or install walls. Any installation is done at the owner's and installer's discretion and risk. Always follow safe lifting practices and wear proper protective equipment when handling stone.

Pricing

Text product type and zipcode for pricing! (785) 340-0301

Tell us the product type and your delivery ZIP. We'll come back by the next business day with stone and freight: the whole number, not a teaser. We deliver the stone. We do not design or install the wall.

Call (785) 340-0301
Mon–Fri 8:00 am – 4:30 pm Central
Email info@sunsetstoneco.com

Fields marked * are required. A phone number or an email is enough.

Call (785) 340-0301Get a Free Quote