Sunset Stone Company guide · Updated 2026-11-10
Text product type and zipcode for pricing! (785) 340-0301
Or call (785) 340-0301 · email info@sunsetstoneco.com. We deliver the stone. We do not design or install the wall.
Height and face
Start with two decisions your installer will also ask about: how tall the wall needs to be, and what you want the face to look like. Height drives tonnage and whether the wall needs an engineer. Face drives the product: a rough natural ledge, a hand-selected 14" Premium course, or milled stone with tight joints.
Walk the line of the wall with your crew. Note the high and low points, any turns or steps, and where the wall will be seen every day versus where it is mainly holding grade. Those notes matter more than a catalog photo. We can help you match a product to that description. We cannot design the wall, size the footing, or plan the drainage. That work stays with the people who will build it.


14-inch, natural ledge, or milled
14-inch means a 14" tall course (how tall each row stands), not how deep the stone runs front to back. 14" Premium Natural Tan and 14" Gray Horizon are Estate, the hand-selected natural courses, with typical 18–24" beds. Sundown Ledge (Ranch) is also a 14" tall natural ledge, with wider 10–30" beds and a rougher face, chosen for a natural look.
Milled stone starts as that same 14" rock and is planed top and bottom to 12¾". Choose it when the joint lines will show and your installer wants every course the same height. Sawn tapered-back ends are a separate upgrade for tight vertical joints. Milled limestone vs natural ledge compares them side by side.
Lower walls and accents can use 9" wall block or 8" Grand Haven. Steps are ordered by the piece; see limestone steps.
What to photograph
A few photos help us quote the right stone and warn you if a 24-ton truck will have trouble getting in. They also help your installer. You do not need a polished plan set to start a price conversation.
- The site as it is now, including the slope or bank the wall will hold.
- The path a truck would use, and where a skid steer or excavator will unload. A full load is about 24 tons on a flatbed or step-deck; see unloading a 24-ton load and delivery.
- Any existing walls, steps, or house stone you want to complement, including Cathedral Ledge or Gray Horizon steps if they are already in the plan.
- A simple sketch or tape measurement: length of the run, finished height at the tallest point, and any tiers.
Then use the stone calculator or how much wall stone do I need? for a planning range. Coverage is an estimate because bed depth, joints, and waste vary. We confirm tonnage with the quote.
Text product type and ZIP
When you are ready, tell us the product type (for example 14" Premium Natural Tan, 14" Gray Horizon, 14" Sundown Ledge Gray, or 12" Milled 50/50) and the delivery zipcode. That is enough for us to price stone and freight together. Attach the photos if you have them.
Text product type and zipcode for pricing! (785) 340-0301
Or call (785) 340-0301 · email info@sunsetstoneco.com. We deliver the stone. We do not design or install the wall.
We will come back by the next business day. Your installer remains responsible for engineering, drainage, and how the wall is built. If you are still choosing a look, Kansas limestone wall stone is the category overview, and the gallery shows finished faces without naming project locations.
Quick answers
Do you design or build the wall?
No. Sunset Stone sells and delivers limestone. Engineering, drainage, batter, and construction belong to your crew or installer. On a tall or loaded wall, that may include an engineer.
What should I send to get a price?
The product type and the delivery ZIP are enough to start. Photos of the site, a rough length and height, and notes on truck access help us check tonnage. Text product type and zipcode for pricing! (785) 340-0301 Email info@sunsetstoneco.com if you would rather write.
Should I choose 14" courses or milled stone?
Choose 14" natural courses when you want a quarried look and a full-height row. Choose 12" Milled (12¾" actual) when you want every course the same height and tight horizontal joints. Sawn tapered-back ends are a further upgrade for tight vertical joints. See 14-inch limestone retaining wall stone and milled vs natural ledge.
How much stone will I need?
Use our stone calculator and how much wall stone do I need? for a planning range. Coverage depends on course height, bed depth, joints, and waste. We confirm tonnage when we quote the load.
Text product type and zipcode for pricing! (785) 340-0301
Or call (785) 340-0301 · email info@sunsetstoneco.com. We deliver the stone. We do not design or install the wall.
